OrangePI Club
reicast trigger and joystick config - Printable Version

+- OrangePI Club (http://orangepi.club)
+-- Forum: International (English) Forums (http://orangepi.club/forumdisplay.php?fid=3)
+--- Forum: *nix Distro (http://orangepi.club/forumdisplay.php?fid=4)
+---- Forum: RetrOrangePi v4 (http://orangepi.club/forumdisplay.php?fid=31)
+----- Forum: SUPPORT (http://orangepi.club/forumdisplay.php?fid=34)
+----- Thread: reicast trigger and joystick config (/showthread.php?tid=2544)



reicast trigger and joystick config - naik - 07-07-2018

Hello again, im triying to configure the reicast joystick for playing, but when i configure via EmulationStation (autoconf) it's doesn't works the triggers or the "exit" button

So i configure via retropie-setup / reicast config, and doesn't works, i tried to change autoconf and put:
Code:
reicast_input = "0"


But still not working, when change the value the emulator crash (back to menu)

hope you can help (:


RE: reicast trigger and joystick config - naik - 07-08-2018

BTW, im using a orange pi PC, with a PS3 SHANWANADAPTOR

copy the /mapping/controller_ShanWanUSBWirelessGamepad.cfg content in "emu.cfg" at dreamcast config folder, change the value of autoconf.cfg and games are working but the joystick config is still not working


RE: reicast trigger and joystick config - alexkidd - 07-08-2018

if you haven't, select 'Update RetrOrangePi' from Retropie-RetrOrangePi menu. the update script "cleans" reicast config. You may also try to run the reicast-joyconfig manually, from retropie-setup - configuration - reicast


RE: reicast trigger and joystick config - naik - 07-08-2018

(07-08-2018, 11:21 AM)alexkidd Wrote: if you haven't, select 'Update RetrOrangePi' from Retropie-RetrOrangePi menu. the update script "cleans" reicast config. You may also try to run the reicast-joyconfig manually, from retropie-setup - configuration - reicast


i do it twice, like you recommend in another post (uptade-retrorangepi)


RE: reicast trigger and joystick config - naik - 07-08-2018

When i look again for Mappings .cfg file, it's not the same when i do the reicast-joyconfig. The ps3 SHANWAN ADAPTOR .cfg file doesnt appears, only the "SHANWANUSB WirelessGamepad"

what i've doing at this moment:

after a clean renstall of entire ROPI 4.2, config joystick via emulation station, do the update-retrorangepi twice, go to retropie-setup/configuration-tools/reicast and configure the buttons, open /opt/retropie/configs/all/autoconf.cfg and change the " reicast_input = "0" " and copy/paste the .cfg config in emu.cfg

but now that i realize is not the file, i can't find the real file made from reicast-joyconfig :S

-- note: when i do the reicast-joyconfig, at the end doesnt show me the "mapping file saved to:" or "here's your mapping file" that shows the reicast-joyconfig code file at the end (in /opt/retropie/emulators/reicast/bin) when finish configuring the analog stick, suddenly exit, is this normal?


RE: reicast trigger and joystick config - naik - 07-14-2018

Solved, partially

Change the PS3 SHANWANUSB conector for Twin USB and works, including triggers and exit button