OrangePI Club
Enable Etherneth on Pi Lite Image 4.2 Slim - Printable Version

+- OrangePI Club (http://orangepi.club)
+-- Forum: International (English) Forums (http://orangepi.club/forumdisplay.php?fid=3)
+--- Forum: *nix Distro (http://orangepi.club/forumdisplay.php?fid=4)
+---- Forum: RetrOrangePi v4.2 version (http://orangepi.club/forumdisplay.php?fid=38)
+---- Thread: Enable Etherneth on Pi Lite Image 4.2 Slim (/showthread.php?tid=2722)



Enable Etherneth on Pi Lite Image 4.2 Slim - r3fear - 09-25-2018

Hello,

I have 2 OPi, one Lite and another ONE, the image of the Lite works correctly in the ONE obviously without LAN, how can I enable it?

This is because I already made many changes in the image of the lite and I want to have only one image for both and that the network works in both.

I hope you can help me.

Regards


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - r3fear - 09-29-2018

Any suggestions Confused ?

Thank you!


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - alexkidd - 09-29-2018

Currently on vacation. From Monday on I'll be able to help


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - r3fear - 09-30-2018

(09-29-2018, 03:17 AM)alexkidd Wrote: Currently on vacation. From Monday on I'll be able to help

Thank you, enjoy your vacation!


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - alexkidd - 10-02-2018

change the script.bin
sudo ln -sf /boot/bin/orangepione.bin /boot/script.bin


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - r3fear - 10-11-2018

Hi, it does not work, it still does not detect the Ethernet.

Thank you very much for your help!


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - alexkidd - 10-11-2018

try "sudo ifconfig eth0 up" to enable interface then "sudo ifconfig" to list if eth0 was created


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - Chubunov - 01-22-2019

Not works!!!


RE: Enable Etherneth on Pi Lite Image 4.2 Slim - Chubunov - 01-22-2019

(01-22-2019, 03:48 PM)Liontek1985 Wrote:
(01-22-2019, 01:43 PM)Chubunov Wrote: Not works!!!
change the script.bin thats the way

i have Orange PI PC, ONE, LITE

with the right "script.bin" works the eth without problems


-check the RJ45 Cable
-test with a other port on the switch/router
I have pi zero, i change script, but now not works video signal((