Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HOWTO - eMMC install script for Ropi
#11
siga las instrucciones:

sudo tar -xvf emmc.install-ropi.tar.gz -C /

solo tenes que ejecutar el comando en la misma carpeta donde esta el archivo
Reply
#12
Related to the ROPi installed on emmc in an OPI Plus 2, how should the SD stay with game roms? Note: I did all the post processes. Should I format the SD and create the folders as if it were a pendrive?
Reply
#13
Greetings, I recently bought a pcb orange pc plus, it came with the sealed package but to my surprise came with the android already installed in his emmc and with that I am not able to pass the ropi to emmc. Would you have some way to format this memory to make it completely empty and as soon as you can pass the ropi to it?

Thank you
Reply
#14
Boot from SD, then erase EMMC filling it with zeroes:

sudo dd if=/dev/zero of=/dev/mmcblk1

Flash the bootloader:

sudo dd if=/usr/lib/linux-u-boot-XXXXXXXXX_5.23_armhf/u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8
(replace XXXX for your board info)

then, run emmc installer
Reply
#15
AlexKidd The SD that I have to use to boot is the same as I installed the ropi? In case I have to access the desktop and then open a terminal and type these commands? Another doubt where I find this information on my card to replace with X?

Thanks again.
Reply
#16
Yes, you have to follow the instructions on the SD with ROPi.
To find your board info, type from terminal:
cd /usr/lib/
ls linux-u (then press TAB to autocomplete the folder name - linux basics, dont press Space)
Reply
#17
Alexkidd wrote the command and still could not delete the emmc android. The script to install the ropi for an emmc to get one and no menu make rewind appeared an option installed on emmet and followed up to 100%. I unplugged a card and removed the card to my surprise continued unlocking just the android. I would like to completely format an emmc, please help me by sending a little bit of linux.

Thank you
Reply
#18
You probably didnt type correctly, can you take a picture while you try it? Installing to emmc was supposed to overwrite android, but...
Reply
#19
Hello,
I have a OrangePi2e, the image works perfectly on the SD card, but when i use the eMMC install and try to boot without the SD card, nothing happens, the screen just stay black.

Any help?

Thx.
Reply
#20
Hello, me again,
I have found on the forum this thread :

http://orangepi.club/showthread.php?tid=2033

I have try this :

(02-21-2017, 04:47 PM)alexkidd Wrote: a last suggestion, that i got to work previously:

1. copy ROPi.img to usb drive, then flash it to emmc:

sudo dd bs=1M if=/media/usb0/ROPi_3.0.1.img of=/dev/mmcblk1

then copy the bootloader if necessary

Didn't work, screen still black, but the "green" light on the board was red

Then i have try to copy the bootloader :

(05-18-2017, 11:18 AM)alexkidd Wrote: Boot from SD, then erase EMMC filling it with zeroes:

sudo dd if=/dev/zero of=/dev/mmcblk1

Flash the bootloader:

sudo dd if=/usr/lib/linux-u-boot-XXXXXXXXX_5.23_armhf/u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8
(replace XXXX for your board info)

then, run emmc installer

Still the same result, black screen with green LED on the board.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  HOWTO - Dreamcast reconfigure controls - Reicast alexkidd 22 14,853 03-05-2019, 03:58 PM
Last Post: HnAw
  HOWTO - display from 3.5mm/RCA CVBS audio/video alexkidd 27 31,888 10-27-2018, 10:22 AM
Last Post: alexkidd
  HOWTO install C library for GPIO and Example Shutdown system with a GPIO button Spirax 2 3,909 10-06-2018, 02:13 PM
Last Post: electron1979
Question HOWTO - GPIO Controller ericktarzia 22 22,610 06-23-2018, 04:25 PM
Last Post: alexkidd
  HOWTO - Using DPad as analog control (N64 emulation) alexkidd 17 14,803 11-05-2017, 02:59 PM
Last Post: Samsonite
  HOW TO - install Amiga emulator and run games? Vadim1972 1 2,213 06-18-2017, 06:47 PM
Last Post: alexkidd
  HOWTO upgrade system without crash it with sudo apt-get upgrade Spirax 1 3,548 06-08-2017, 10:24 AM
Last Post: alexkidd
  HOWTO - Run some ROMs from network share (per emulator) chupo_cro 9 8,748 05-18-2017, 10:35 PM
Last Post: chupo_cro
  HOWTO - execute permissions in NTFS storage (useful to change ROMS folder) Sikotik 2 3,898 12-30-2016, 01:25 AM
Last Post: niabi
  HOWTO: Set time from RetroPie Menu Sikotik 0 2,508 12-19-2016, 02:09 AM
Last Post: Sikotik

Forum Jump:


Users browsing this thread: 1 Guest(s)