Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Beelink X2 - Stuck on installing
#1
Hi,

Has anyone been able to get the latest build working on the BeelinkX2.  I have tried multiple times but always freeze on the installing screen. I have tried multiple SD cards and power supplies but to no avail. It will load the OrangePI PC image successfully but the emulators can barely run and pegs the cpu. not sure what else I can try

Thx
Reply
#2
Looks like the same issue as here:
http://orangepi.club/showthread.php?tid=1974

Try the following - reimage sd card, connect ethernet,then boot, wait for 5 minutes, then try to login via ssh (you can peek the ip on router).
After login (use pi/pi as login/password), do a "sudo reboot".
Worked for me.
Reply
#3
(02-09-2017, 06:12 AM)znoxx Wrote: Looks like the same issue as here:
http://orangepi.club/showthread.php?tid=1974

Try the following - reimage sd card, connect ethernet,then boot, wait for 5 minutes, then try to login via ssh (you can peek the ip on router).
After login (use pi/pi as login/password), do a "sudo reboot".
Worked for me.

Thanks znoxx. I gave it a few tries with different sd cards/power supplies but the Ethernet interface doesn't get an ip. I'll keep digging I know it works since the Orange PI PC image has no issues with the installation. Thx again for the suggestion.
Reply
#4
Just give a try with pure Armbian image to make sure hardware works ok...
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  beelink x2 failed to start load/save RF kill switch mino182 2 1,986 06-29-2017, 12:38 PM
Last Post: brains74
  1680x1050 DVI ...everything is gone Beelink X2 masteripper 13 6,555 01-06-2017, 08:46 PM
Last Post: masteripper

Forum Jump:


Users browsing this thread: 1 Guest(s)