Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Xbox 360 Joystick Need install firt?
Well my doubt is I just installed retrorange pi 4.1 I'm going to use a xbox 360 wired control should I install the drive through the retropie menu setup by source?
genuine xbox 360 controller with wireless receiver works out of the box. 'xpad' module is loaded automatically.

cannoy say about wired ones, we dont have any to test
I have tested wired xbox360, xbox one! you can use and mix it

1.) Install ROPI (without plugged controller!, only keyboard)
2.) Install xboxdrv (retropie menu)
3.) edit int the folder "/etc/modprobe.d/" the blacklist config and add "blacklist xpad" without ""
4.) edit the "/etc/rc.local"

Add your controllers manualy
id = wired
wid= wireless
xboxdrv --trigger-as-button --id 0 --led 2 --deadzone 4000 --silent &sleep 1
xboxdrv --trigger-as-button --id 1 --led 3 --deadzone 4000 --silent &sleep 1
xboxdrv --trigger-as-button --id 2 --led 4 --deadzone 4000 --silent &sleep 1
xboxdrv --trigger-as-button --id 3 --led 5 --deadzone 4000 --silent &sleep 1
you can mix wired and wireless !!!

5.) restart retropie
6.) shutdown retropie
7.) plug your controller & start retropie
8.) set your buttons
9.) finish play and lought ^^

All Controller Works with player LED! no blinking playerstatus!

You want for every Controller a own config or special stats look here

After the Install steps
-Xbox One wired controller must plugged everytime before start retropie when you mix wired and wireless!!!

i have tested this over months, works great
the biggest problem ist to find this way ^^
Hi guys, i'm triying follow this tutorial the problem is i can't found /etc/rc.local

and this part
Add your controllers manualy
id = wired
wid= wireless
where is my ID and my WID. Sorry for my english. I would be very grateful if you make a video or tutorial with photos thanks.
quit emulation station

go to home directory with "cd"

sudo nano /etc/rc.local

xboxdrv --trigger-as-button --id 0 --led 2 --deadzone 4000 --silent &sleep 1

id says its a wired controller
replace it with wid you says is a wireless controller

0 says its the first controller
replace with 1 says its the second, replace with 2 says is the controller three ....

Possibly Related Threads...
Thread Author Replies Views Last Post
Photo Joystick Wireless 2,4 GHz Nill2016 1 820 05-18-2018, 11:56 AM
Last Post: alexkidd

Forum Jump:

Users browsing this thread: 1 Guest(s)