Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GPIO (one more time)
#1
Hi!

I have a couple of spare non-working gamepads and I'm pretty sure I can wire them using this diagram:

https://raw.githubusercontent.com/recalb...Osb%2B.png

But I don't understand couple of things, can anyone clarify please:

1) When button is pressed, let's say "A" on Joy1, that means GPIO25 is shortened with "GND" -- pulled down ? OR ? to 3.3v via resistor (up) ? which nominal should be used then ?
2) Let's imaging everything is wired, and I need now somehow let the system understand that GPIO pads are connected. What is the next step ? Any kind of module load ? Config edited ?


Please help.
Thanks in advance
Reply
#2
Install GPIO support from RetrOrangePi menu, a python script will start . This diagram works for most users. 
https://github.com/retr0rangepi/RetrOran...aster/GPIO
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  RetrOrangePi 4.1 - Orange Pi Zero GPIO - Getting GPIO to work bharathram21391 15 298 05-15-2018, 04:58 PM
Last Post: alexkidd
  How to show the roms of the SD card and pendrive at the same time? robson 2 250 03-17-2018, 07:51 PM
Last Post: robson
  GPIO... indevor 18 1,424 02-28-2018, 07:02 PM
Last Post: indevor
  GPIO config mauricio-ramos 2 359 02-26-2018, 02:34 AM
Last Post: canadien
  Enable GPIO - Failed to fetch Padova 7 840 02-15-2018, 10:22 PM
Last Post: alexkidd

Forum Jump:


Users browsing this thread: 1 Guest(s)