Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
reicast trigger and joystick config
#1
Hello again, im triying to configure the reicast joystick for playing, but when i configure via EmulationStation (autoconf) it's doesn't works the triggers or the "exit" button

So i configure via retropie-setup / reicast config, and doesn't works, i tried to change autoconf and put:
Code:
reicast_input = "0"


But still not working, when change the value the emulator crash (back to menu)

hope you can help (:
Reply
#2
BTW, im using a orange pi PC, with a PS3 SHANWANADAPTOR

copy the /mapping/controller_ShanWanUSBWirelessGamepad.cfg content in "emu.cfg" at dreamcast config folder, change the value of autoconf.cfg and games are working but the joystick config is still not working
Reply
#3
if you haven't, select 'Update RetrOrangePi' from Retropie-RetrOrangePi menu. the update script "cleans" reicast config. You may also try to run the reicast-joyconfig manually, from retropie-setup - configuration - reicast
Reply
#4
(07-08-2018, 11:21 AM)alexkidd Wrote: if you haven't, select 'Update RetrOrangePi' from Retropie-RetrOrangePi menu. the update script "cleans" reicast config. You may also try to run the reicast-joyconfig manually, from retropie-setup - configuration - reicast


i do it twice, like you recommend in another post (uptade-retrorangepi)
Reply
#5
When i look again for Mappings .cfg file, it's not the same when i do the reicast-joyconfig. The ps3 SHANWAN ADAPTOR .cfg file doesnt appears, only the "SHANWANUSB WirelessGamepad"

what i've doing at this moment:

after a clean renstall of entire ROPI 4.2, config joystick via emulation station, do the update-retrorangepi twice, go to retropie-setup/configuration-tools/reicast and configure the buttons, open /opt/retropie/configs/all/autoconf.cfg and change the " reicast_input = "0" " and copy/paste the .cfg config in emu.cfg

but now that i realize is not the file, i can't find the real file made from reicast-joyconfig :S

-- note: when i do the reicast-joyconfig, at the end doesnt show me the "mapping file saved to:" or "here's your mapping file" that shows the reicast-joyconfig code file at the end (in /opt/retropie/emulators/reicast/bin) when finish configuring the analog stick, suddenly exit, is this normal?
Reply
#6
Solved, partially

Change the PS3 SHANWANUSB conector for Twin USB and works, including triggers and exit button
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Dreamcast - Reicast saroninux 1 112 09-11-2018, 11:14 AM
Last Post: alexkidd
  reicast emu.cfg does not save a command line rtokuda 11 1,105 05-05-2018, 03:29 PM
Last Post: alexkidd
  Reicast use VMU ? rtokuda 1 343 04-25-2018, 11:30 AM
Last Post: alexkidd
  GPIO config mauricio-ramos 2 758 02-26-2018, 02:34 AM
Last Post: canadien
  OpenELEC default config files OrangePI PC Lichtenshtein 1 772 01-10-2018, 10:42 AM
Last Post: alexkidd
  Configure Control for Reicast rtokuda 4 1,316 01-04-2018, 07:32 PM
Last Post: rtokuda
  UAE4ARM: Black Screen after config mczero 11 3,494 12-03-2017, 07:01 PM
Last Post: mczero

Forum Jump:


Users browsing this thread: 1 Guest(s)