Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GPIO controls
#1
how to enable GPIO controls on 4.2 SLIM version (OrangePi Lite)

GPIO controls similar to Retrogame (adafruit) or mk_arcade_joystick_rpi


please advise (noob here)


thank you






.
Reply
#2
Select from EmulationStation:
RetroPie - RetrOrangePi - Enable GPIO
Reply
#3
(08-17-2018, 11:54 AM)alexkidd Wrote: Select from EmulationStation:
RetroPie - RetrOrangePi - Enable GPIO

thanks, and i appreciate the response....

i did try this, but without success
not sure if the GPIO pinouts are the same as the MK arcade pinouts



what are the GPIO pinouts for the controls.....


also vitally, is there a way to edit these pinouts to your own preference or wiring.....




thanks


.
Reply
#4
What exactly didnT work, be more specific
Reply
#5
(08-19-2018, 10:21 AM)alexkidd Wrote: What exactly didnT work, be more specific

the controls didn't work (non-responsive).....

so either i've not enabled them properly (possible)....


or most probably didn't wire them up correctly....


this is why i asked if you could confirm the GPIO pinouts.....
or if the GPIO pinouts could be assigned however, then how is this done....
(this way i can eliminate one of the possibilities, it not being the wiring)



thank you




.
Reply
#6
1. check this: https://github.com/retr0rangepi/RetrOran...aster/GPIO
2. confirm driver was installed by re-configuring input (are 2 Gamepads Detected?)
3. if no button is working, probably a wrong wiring (are GND connected as well?)
4. if only some buttons work, maybe the controller model needs some tweaks (on retroarch.cfg) - check above first than we talk about this
Reply
#7
(08-19-2018, 01:16 PM)VeteranGamer Wrote:
(08-19-2018, 10:21 AM)alexkidd Wrote: What exactly didnT work, be more specific

the controls didn't work (non-responsive).....

so either i've not enabled them properly (possible)....


or most probably didn't wire them up correctly....


this is why i asked if you could confirm the GPIO pinouts.....
or if the GPIO pinouts could be assigned however, then how is this done....
(this way i can eliminate one of the possibilities, it not being the wiring)



thank you
Here is the pinout for tzgame (see diagram in attachment): http://orangepi.club/showthread.php?tid=...66#pid4466
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  GPIO functions correia5022 6 1,004 06-17-2019, 09:17 PM
Last Post: correia5022
  Problems with controls in every system Sonic3D 1 441 05-21-2019, 09:00 PM
Last Post: alexkidd
  Amiberry controls on RetroStone help luckithroe 3 698 04-19-2019, 01:59 AM
Last Post: luckithroe
  Openbor menu controls and file limit. kill_us_Now 1 737 12-22-2018, 08:41 PM
Last Post: kill_us_Now
  Don't Working GPIO Joypad on OPi Zero... intelis 3 1,461 12-04-2018, 02:30 PM
Last Post: intelis
  Genesis/MegaDrive Controller GPIO dee098 3 1,626 08-19-2018, 11:20 AM
Last Post: alexkidd

Forum Jump:


Users browsing this thread: 1 Guest(s)